honesty.org forum

hello board;

my name is boris & i live in bellingham, wa
ive been researching what i can of this 'chemtrail' business, with an eye specifically to what can be done about it
IF my observations are correct, i believe i have found a workable solution in 'orgonite devices' & their intelligent application
really, i have to say 'IF' because its such a goofy concept & there isn't much of a documented body of work from reliable sources (that i've been able to find, anyway) so....
if you're having problems with spraying in your area, the orgonite is worth a shot. at the very least, it cant hurt anything (again, that im aware of)

should you decide to try experimentation with this, i strongly urge to you to keep some kind of records; post them too but make sure you have 'hard copy', because (as the board moderator here can attest) sometimes things 'go missing' off the internet

people are encouraged to view my site
http://groups.google.com/group/bellinghamorgone

thanks for reading this & dont give up hope!

HOW I MAKE A BASIC 'TOWER-BUSTER' (Part 1)

[attachment=16]

Be sure to assemble everything you'll need & prepare your area before pouring your resin; once you mix the resin & the hardener you've got *maybe* 45 minutes to an hour-&-a-half (I've found that the resin sets up a lot faster during summer-time), so you'll have to work quickly if you're making a bunch.

Normally I'll spend at least a couple days beforehand preparing all the components for a resin-pouring session. Once it sets up you're done, for good or ill, so a few extra moments spent in precaution will not likely be wasted. I try to visualize myself doing the work, before I actually put my hands on it, so that I can foresee anything I might need that I've forgotten (& there's always something).

[attachment=11]

I use 20-guage copper wire from the craft-store for the coils, bent around a funnel into a spiralling shape; in winding them, I pinch an end of the wire against the narrow base of the funnel, then wind the coil 'up & to the left' on its path to the wider end of the funnel, to achieve a clockwise-rotational direction.

[attachment=9]

I attach quartz crystals to these coils first with superglue to fix them in place, & then later secure them with a spot of PVC-glue so they hold together during the construction-phase. Quartz is pretty easy to find--try a metaphysical bookstore, if nothing else presents itself; I'm told that even low-grade gravel-quartz works but I like the shiny stuff.

[attachment=10]

The metal-shavings I use include aluminum, steel, iron, brass, copper & pssibly titanium; I acquired most of it going door-to-door through the shops in the Industrial District. I'm told aluminum alone will work fine, but I like the variety, as I think it will process a wider array of frequencies. Who knows.

A word of warning: I have found that the oil used to lubricate the saws for the aluminum will DESTROY your CD's (another painful lesson learned), so wash up real well if you handle the metal shavings at all.

[attachment=15]

I use old plastic 2-liter bottles cut in half to mix resin; I don't recommend using anything nice, because they get gummed up too badly to ever reuse. I mark out Oz. marks by measuring out tablespoons of water (2 tbsp = 1 fl. oz.) to get guide-marks for mixing in the catalyst.

You will need some rubber or latex gloves (you WILL need them, as the resin can get messy & you really DON'T want to accidentally ingest any, speaking from personal experience). A dust-mask would be good, too; I use a cloth over my face & try not to breathe too deeply when I'm hovering over a batch of the stuff, but go with the mask if you can.

[attachment=17]

(PART 2 TO FOLLOW)